2BE type water ring vacuum pump structural features
|2BE type water ring vacuum pump structural features(1) water ring vacuum pump impeller according to a lowest absolute pressure, the use of welded structures.
(2) shaft seal packing seal, packing to prevent damage to the shaft of the mill busy movement, the use of chrome steel protective sleeve.
(3) the pump body is oval structure, made of carbon steel, the pump can be rotated.(4) the bearing member. In the drive side and the non-drive side, each equipped with a cylindrical roller bearings, radial force. On the non-drive side arranged a radial ball bearings, axial force.
(5) In order to maintain a constant water ring, during operation, must be continuous water supply to the pump. The open loop water supply according to the actual situation of the water network.
(6) The separator is 2BE water ring vacuum pump wear parts, it requires good wear resistance.
(7) The side cover is made from HT200, side cover equipped with automatic drain valve to eliminate excess water in the pump, the pump makes a better job, while the side cover with inspection cover, used to check studio situation.
Impact of fluid flow on the water ring vacuum pump performance
Water ring vacuum pump as a special class of device, it works determines the device during use must control the fluid flow, and to ensure that in any case, the water ring vacuum pump can not be started in a state filled with the working fluid, in order to avoid damage to the pump.